Authorized Service Facilities


Authorized Service Facilities (ASF) provide you with the finest service and maintenance program in the Commercial aircraft industry. The ASFs are independently managed and receive periodic audits from Bombardier to ensure high quality service for all CRJ Series and Q-Series operators.

ASF for Bombardier CRJ Series Aircraft

Adria Airways Maintenance Centre

STAECO

Tulpar Technic

ASF for Bombardier Q-Series Aircraft

FlyBe

Hawker Pacific

SAMCO



Adria Airways Maintenance Centre
Ljubljana Airport
4210 Brnik
Slovenia
Tel.: +38642594000 (switchboard)
Tel.: +38642594273 (technical sales)
Fax: +38642023071
E-mail: info.maintenance@adria.si
www.adria-airways.com

Services provided:


Back to top


STAECO
Yao Qiang International Airport
Jiang, Shandong
China 250107
Tel.: + 86-531-82082931
Fax: + 86-531-82082932
http://www.staeco.com

STAECO-Taikoo (Shandong) Aircraft Engineering Co., Ltd. is a leading MRO for narrow-body and commercial aircraft with associated facilities and resource.

STAECO is a Joint-Venture MRO established by Shandong Aviation Group, Hong Kong Aircraft Engineering Co., Ltd. (HAECO), Taikoo (Xiamen) Aircraft Engineering Co., Ltd. (TAECO), and Hong Kong Zhongkai Aviation Consulting Service Co., Ltd. The associated company above support STAECO with experience, management and operation and share the resource of MRO as request.

STAECO is now operating four hangars and can accommodate several Single Aisle grade type aircraft at same time for heavy check, STAECO is now developing hangar 5 with three slots and should be opened in middle of 2009. The total maintenance square in STAECO over 15,000 square meters and annex shops about 6,000 square meters.

The total storage up to 3,000 square meters with bonded store, customer store, standard store, chemical store, raw material store, commercial store, etc. The back-shops include sheet metal, composite, machine, painting, heat-treatment, welding, spray, etc.

STAECO now has obtained approvals from major world authorities such as CAAC (China), FAA (USA), JCAB (Japan), EASA (Europe), etc. The capabilities include Bombardier CRJ200/700 up to heavy check, cabin refurbishment, exterior painting, component repair and NDT, etc.

Back to top


Tulpar Technic, Ltd.
Kazan International Airport, 420017, Russia
Phone: +7-(843)-267-87-84
E-mail: technic@tulpar.ru
www.technic.tulpar.ru

Back to top


FlyBe
New Walker Hangar
Exeter International Airport
Exeter, Devon EX5 2BG
Tel.: + 44(0) 1392 364 520
Fax: + 44(0) 1392 266 981
www.flybeas.com

The Commercial Aircraft Service Facility in Exeter, England, provides an efficient and strategic service resource for all Dash 8/Q-Series operators in the region.

British European Aviation Services (BEAS) has developed strong expertise with the Dash 8 type and has invested substantially in the capabilities of the facility in south-west England. BEAS is a sister company to British European Airlines, who operate the Q200, Q300 and Q400 turboprops, as well as CRJ200 commercial jets.

By selecting a Bombardier-approved maintenance facility, customers get a commitment to the best services in the industry. Whether it's line maintenance or a major 'C' check, BEAS is not only extremely competitive and competent but also provides a complete spectrum of integrated services-all affirmed to high factory standards.

Back to top


Hawker Pacific
112 Airport Avenue,
Bankstown Airport,
NSW 2200 Australia
Tel.: + 61 2 9708 8555
www.hawkerpacific.com.au

Hawker Pacific is a world-class international aviation sales and aircraft support company. It was founded in 1978 and is headquartered in Sydney, Australia. It has a strong facility network across Australia/Pacific, Asia and the Middle East.

The Hawker Pacific operational structure is founded on the interconnectivity of five groups, Aircraft Support, Spares & Logistics, Flight Services, Aircraft Sales and Government & Defence. This comprehensive group structure puts Hawker Pacific in the unique position of delivering an unparalleled range of customer specific turn-key solutions.

Hawker Pacific Aircraft Support is internationally recoginised as a high performance customer focused organisation that ensures clients' operational, maintenance, engineering and modification needs are delivered on time and on budget. Through the development of strong OEM relationships, stringent quality management systems, extensive certification, a highly trained work force and heavy investments on facility infrastructure, Hawker Pacific Aircraft Support now leads the region for maintenance and modification servicing.

The Aircraft Support one-stop-shop philosophy is delivered through the all-inclusive specalised divisions of Airframe, Hawker Pacific Technologies (Design Engineering), Engines / Components and Avionics.

Back to top


SAMCO Aircraft Maintenance
Marketing and Sales Department
Horsterweg 19
6199 AC Maastricht-Aachen Airport
PO Box 108
6190 AC BEEK [L]
The Netherlands
Tel.: +31 43 3587900
Fax: +31 43 3587908
E-mail: info@samco.aero
www.samco.aero

SAMCO Aircraft Maintenance, established in 1988, is an independent third party maintenance provider for a complete range of regional jet and turboprop aircraft. SAMCO’s modern, fully equipped facility is located in the heart of Europe, at Maastricht Airport in the south of Holland. This base supports a wide range of aircraft maintenance activities varying from heavy base-maintenance checks, line-maintenance, logistic support, asset and maintenance management to EASA Part 21 approved design changes.

CAPABILITY
In addition to other aircraft types, the EASA Part-145 maintenance approval includes the DHC-6 and Dash-8 Series aircraft. Capability for all types extends to line maintenance, heavy base maintenance checks, structural repairs and structural & avionics modification programs. Due to the variety of customers SAMCO has, besides the EASA Maintenance approval, various other approvals such as the Canadian, Nigerian and Cameroon maintenance approvals.

With our EASA Part 21 design organization approval, SAMCO is able to offer design changes for minor modifications and repairs. Interior modifications, electrical and avionic upgrades are within our design capability, allowing our maintenance organization the ultimate flexibility in providing our customers with immediate solutions.

BASE MAINTENANCE
The two modern base maintenance facilities at Maastricht Airport extend to 4220 square meters, i.e. a total capacity for seven aircraft, and accommodate virtually all types of turbo props and jets up to and including the 100 seat capacity. Project capabilities vary from smaller overnight checks to heavy maintenance checks, e.g. C, D, 36K, 40K cycle checks, aircraft storage, major structural repairs, modifications, cargo conversions, interior refurbishment, and avionics modifications.

Through detailed project planning, project management and direct reporting structures to our customer representatives, we are able to give the added value to our services, thereby enabling us to minimize downtime and achieve maximum punctuality.

LINE MAINTENANCE
Our service has no limits, and clients can also count on our expertise at their own locations, thus profiting from extensive know how and professionalism on site. Technicians are frequently assigned to short and long term projects at any location abroad. In combination with the base maintenance facility, planning, engineering and logistic support departments, we are able to provide you with turnkey maintenance support in any segment, tailored to your specific requirements. The flexible attitude guarantees the highest level of service as expected by our customers.

HANGAR AND SHOP FACILITIES
Besides the two fully equipped base maintenance hangars, SAMCO also facilitates 290 square meters of supporting shops which are able to accommodate wheels-, brakes- and battery overhaul, composite repairs and minor paint repairs. Facilities for aircraft painting, propeller & engine repair and overhaul are in the vicinity of our facility.

ENGINEERING TECHNICAL SUPPORT
With our real time computerized web-based maintenance management & logistics program, SAMCO is able to provide operators with comprehensive support irrespective of their geographical location. Online access will enable you to access your aircraft data round the clock. We can provide various services, in line with operator or owner requirements, LOGISTICS
Through established relations with key manufacturers, suppliers and repair companies, SAMCO is able to guarantee its customers prompt delivery of any part with competitive prices round the clock. SAMCO is able to provide a full logistic support package for your operation. Beside the part inventory located at our Maastricht stores facility, Samco is able to support you with outsourcing of component repair and overhaul, component exchange services and consignment stock management. Online access enables our customers to track their parts 24hrs per day.

SAMCO is a professional organization, supported by years of experience, with a dedicated well-trained staff and an extensive network of contacts with various spare parts suppliers and manufacturers, and is able to provide cost effective and flexible maintenance solutions to operators and lease companies while at the same time maintaining the highest levels of punctuality and safety. Building on a solid base of knowledge, SAMCO is able to define a level of service that is considered by many as leading in the sector.

Back to top